round mechanical tubing
"
構造Domは管、エンジン マウントに1インチの円形の鋼鉄管金属をかぶせる
Product Name: Mechanical Cold Drawn Welded DOM Steel Tubing ASTM A513 Type5 with the Internal Weld Seam Removed Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM Steel Tubing, is a welded mechanical round steel tube with the internal weld seam removed creating a smooth internal surface. DOM round steel tube has been drawn over a mandrel to produce a tube having more exact dimensional accuracy and tolerances, and a very smooth insde and outside finish. DOM steel
ASTM/A513 Dom Steel Tubing 6 - 168mm OD Size 1 - 15mmの重量Size For Bushings
Product Name: ASTM A513 Type5 1020 Mechanical Grade , DOM Round Steel Tube Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM Steel Tubing, is a welded mechanical round steel tube with the internal weld seam removed creating a smooth internal surface. DOM round steel tube has been drawn over a mandrel to produce a tube having more exact dimensional accuracy and tolerances, and a very smooth insde and outside finish. DOM steel tubing is ideal for more stressful
鋼鉄管の優秀な強さのあたりのよい耐久性の合金鋼の継ぎ目が無い管
30ХГСА 30HGSA 30CrMnSiA Alloy Steel tubes steel pipes for oil and gas and geological drill pipes Application:seamless steel tubes for oil and gas and geological drill rods application 30ХГСА 30HGSA 30CrMnSiA Chemical composition, % C Si Mn Ni S P Cr Cu 0.28 - 0.34 0.9 - 1.2 0.8 – 1.1 Up to 0.3 Up to 0.025 Up to 0.025 0.8 - 1.1 Up to 0.3 Temperature of 30HGSA material critical points. Ac1 = 760 , Ac3(Acm) = 830 , Ar3(Arcm) = 705 , Ar1 = 670 , Mn = 352 Mechanical properties, Т
高力鋼鉄管のあたりのオイルのドリル棒の合金鋼の継ぎ目が無い管
73x8.5 83x9 38Cr2MoAlA 38CrMoAl 38H2MUA 38X2МЮА Alloy steel seamless pipes for oil drill rods. Additional technical requirements for steel grade 38H2MUA pipes Asortment: -ID 28mm, WT 1,2 mm - ID З Зmm., WT 1,Зmm - ID 39,4mm, WT 1,3 mm - ID 45,4mm, WT 1,3 mm GOST 8734-75 3750mm Curvature shouldn’t exceed 1mm for 1m Mechanical properties, heat treatment should correspond to GOST 8734-75, 8733-74, group V Chemical composition, % С Мп Мо Р S Si Сг Аl GOST 4543-75 0,35±0.01 0.30±0
小さいODの精密Domのきれいな表面が付いている鋼鉄管のASTM/A513タイプ
Product Name: Small OD Precision DOM Steel Tubing ASTM A513 Type5 1020 1026 4130 with Clean surface Application: For auto parts, machinery, mechanical engineer Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM mechanical tubing is manufactured to ASTM Specification A513 This product has tensile properties that are comparable to cold-drawn seamless steel tubing of the same steel analysis and nominal size. In addition, the DOM tubing has superior concentricity and
1 - 20mm Structural Round Steel Tubing、MechanicalはSteel Tubeを冷た転がした
Russian Steel Standard GOST8734 Seamless Cold Drawn Stee Tube for mechanical and structural purpose Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 11.8m Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat Treatment 6. Straightening/Cutting to
機械合金鋼Seamless Tubes、4130/4140 1 - 15mm Round Steel Tubing
Product Name: 4130 / 4140 Seamless Alloy Steel Tube , Mechanical Alloy Steel Tubing with high strength Material:1010, 1020, 4130 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: For mechanical application Stable Quality with Comeptitive Price. +SR Heat Treatment, Strength Relief heat treatment. Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating
耐久のSeamless Cold -引き分けのSteel Tube Round Steel Tubing 1 - 20mmの重量Size
GOST8734/GOST8733 Seamless cold deformed Steel Tube by size 25x2mm 25x2.5mm 20x2mm 20x2.5mm Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 12meters This standard is applied to seamless cold and warm deformed steel pipes of general purpose of carbon and alloy steel. Pipes are to produce in accordance with requirements of present standard conforming with technological process in accordance with
冷たい-引き分けのRound Steel Tubing SMLS Type 6 - 420Mm Outer Diameter Customized Design
Cold drawn aisi 4130 alloy steel tubes and pipes Alloy steel 4130 4140 for ASTM A519 seamless steel tubes ASTM A519 SEAMLESS STEEL TUBES, by DOM production, with the steel grade of SAE4140 and SAE4130, other alloy steel grade upon customer's agreement.: SAE4130: C: 0.28-0.33% Mn: 0.40-0.60% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% cold drawn aisi 4130 alloy steel tubes and pipes SAE4140: C: 0.38-0.43% Mn: 0.75-1.00% P max 0.40% S max 0.40% Si: 0.15
