round mechanical tubing
"
滑らかなカーボンはフット サイズ鋼管17 - 24のASTM/ASME A513のタイプ5 DOM溶接した
Product Name: ASTM / ASME A513 Carbon Steel Welded Tube Type 5 DOM Tube Length 17-24 Feet Size(mm): O. D.: 6.0-168.0 W. T.: 1.0-15.0mm L: Max 12000mm DOM mechanical tubing is manufactured to ASTM Specification A513 This product has tensile properties that are comparable to cold-drawn seamless steel tubing of the same steel analysis and nominal size. In addition, the DOM tubing has superior concentricity and a high degree of uniformity in wall thickness. DOM Steel Tubing, is a
縫い目のない冷引鋼管
Seamless Cold Drawn Steel Pipe A seamless cold drawn steel pipe is a type of high-precision seamless steel tube manufactured through the cold drawing process. This process involves pulling (drawing) a seamless steel shell (hot-rolled or extruded) through a die and over a mandrel at room temperature to reduce its diameter and wall thickness to precise dimensions. This method produces pipes with superior surface finish, tighter dimensional tolerances, enhanced mechanical
38CrMoAl 38H2MUA 38X2МЮАの合金鋼Seamless Pipes For Oil/Gas Drill Rods
73x8.5 83x9 38Cr2MoAlA 38CrMoAl 38H2MUA 38X2МЮА Alloy steel seamless pipes for oil drill rods. Additional technical requirements for steel grade 38H2MUA pipes Chemical composition, % С Мп Мо Р S Si Сг Аl GOST 4543-75 0,35±0.01 0.30±0.02 0.15± 0.02 ≤ 0.025 ≤0.025 0.20± 0.02 1.35± 0.05 0.70± 0.1 Our tolerance ±0.05 ±0.1 ±0.05 Same Same ±0.1 ±0.2 ±0.2 Mechanical properties: steel yield (N/ mm²) tensile (N/ mm²) elongation % Hardness, HB max 38X2МЮА 420 617 12 250 Size list: OD,
石油のRefiningの合金鋼Seamless Pipes 6000mm - 12000mm Length
GOST550-75 10Г2 15Х5М 15X5 10Mn2 25x2 20x2 25x2.5 Alloy Steel tubes steel pipes for Petroleum refining tubes Application:seamless steel tubes for petroleum refining tubes application Normal sizes:25x2.5mm 25x2mm 20x2mm Механические свойства 10Г2 15Х5М 15X5 марка стали Steel grade Времен. сопрот., Tensile Н/мм2 Предел текуч., Yield Н/мм2 Относит. удлин., Elongation % Относит. сужение, reduction % Ударная вязкость Impact KCU, Дж/см2 Твердость по Бринеллю, Hardness НВ, не более
注文のLength Low Alloy Steel Pipe 4130/30CrMo Material High Straightness
Product Name: 4130 / 30CrMo Seamless Cold Drawn Alloy Steel Pipe , Seamless Mechanical Tubing Material:1010, 1020, 1045, 4130, 4140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: For mechanical application Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5
流動Seamless Cold -引き分けのSteel Tube 6 - 114mm OD Size GOST 8734 20# Model
GOST8734 20# Annealed Seamless Steel Tube for General Purpose Economic Round Tube Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 11.8m Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat Treatment 6. Straightening/Cutting to specified length
冷たい- Seam Welded Pipe、35Mn2 Scaffolding Steel Pipe For Automotive Parts引かれる/Rolled
Product Name: 35Mn2 Seamless Alloy Cold Drawn / Cold Rolled Steel Tube Automotive Parts Tubing Material: 35Mn2 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Cold Rolled process on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Rolling, On line inspection 5. Heat
35Mn2/40Mn2合金鋼Seamless Pipes Cold -引き分けのProcess For Automotive Parts
Product Name: 35Mn2 / 40Mn2 Seamless Alloy Cold Drawn Steel Tube , Automotive Parts Steel Tubing Material: 35Mn2 , 40Mn2 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Cold Rolled process on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Rolling, On line inspection 5.
20Cr/40Cr合金鋼Seamless Pipes For Fluid High Elongation/Hardness
GOST8733 10Mn2 / 20Cr / 40Cr Seamless Cold Drawn Alloy Fluid Steel Pipe Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 11.8m Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection 5. Heat Treatment 6. Straightening/Cutting to specified length/Finished
